LED Conversion Light

I’ve needed to replace the number plate light on the back of the land rover for some time – one of the previous owners must have reversed the landy into a wall, and broken the light. (Not that there is a number plate at the top anymore, one has been bodged onto the bottom) But […]

3D Printed Tablet Holder

After fetching the tablet (being used as a satnav) from the floor of the Land Rover for what seems like the 100th time, I decided to design a proper holder to screw onto the dash. 30 minutes in solidworks, and I had a design. I added some small pieces of sticky-back foam to protect the […]

More 3D Printed Parts…

So I’ve been giving the 3D Printer a workout, making various brackets and such for the Land Rover. Solar Panel Brackets on the Printer… And all 8 brackets on the desk. Will be used to support 25×25 box section that the solar panels bolt to. Some brackets to hold the axe and spade. Note the […]

What would I do without a 3D Printer…

Sometimes a 3D printer is very useful to have around – I needed a terminal block for blade terminals for the Land Rover, (I mean, there’s ony so many times you can use piggyback terminals!), so 10 minutes in CAD, 90 minutes printing time and I have a terminal block that I could just bolt […]

Adding Cooling Fans on a 3D Printer

One thing I have on my 3D Printer (And I’m sure most others are the same) are cooling fan for the electronics and extruder body, to keep everything running cool. However currently on my printer, they are wired to the power, so if the printer is on, so are the fans. Wouldn’t it be nice […]

Land Rover Heater Upgrade – Part 1

As I’ve been driving around without a heater in the Land Rover (It wouldn’t fit after I did the Rover V8 Conversion), now is the time to get some heating again. I will be using the original heater, plus a second kitcar type heater inside, with new 3D Printed ducting and some rather powerful fans, […]