More 3D Printed Parts…

So I’ve been giving the 3D Printer a workout, making various brackets and such for the Land Rover. Solar Panel Brackets on the Printer… And all 8 brackets on the desk. Will be used to support 25×25 box section that the solar panels bolt to. Some brackets to hold the axe and spade. Note the […]

I made some Candle Holders

I’m back everybody! Ive recently finished making some tealight candle holders from wood. One set of four, based on the Elemental stones from Fifth Element, for a friend of mine, and a really simple block candleholder for me!

Changing a Diff (Fail!)

So I thought I’d spend the evening taking the rear diff out of the landy, so I can change to a 3.54 ratio. Had no issues removing the easy bits, but had no luck getting the differential out of the casing. I even made a diff spreader, but that ended up looking a bit banana-shaped… […]

Land Rover Camper Conversion Update

I have been making some progress on converting the Land Rover into a camper, including starting the new floor (having to lift it up, to make room for the LPG tanks), finishing the storage/seat units on each wheelbox, and making a centre cubby box. Photos save me typing lots! Floor cut away, plus the bracing […]

Sewing Time!

So a few weeks ago I decided to finally make a cover for the landy spare wheel… (I bought the canvas a year ago…) I’m more than happy with the result, even keeps everything under the cover dry! It has shrunk a little, next time I know to make it a little bit bigger! Making […]

What would I do without a 3D Printer…

Sometimes a 3D printer is very useful to have around – I needed a terminal block for blade terminals for the Land Rover, (I mean, there’s ony so many times you can use piggyback terminals!), so 10 minutes in CAD, 90 minutes printing time and I have a terminal block that I could just bolt […]

Adding Cooling Fans on a 3D Printer

One thing I have on my 3D Printer (And I’m sure most others are the same) are cooling fan for the electronics and extruder body, to keep everything running cool. However currently on my printer, they are wired to the power, so if the printer is on, so are the fans. Wouldn’t it be nice […]

Land Rover Heater Upgrade – Part 1

As I’ve been driving around without a heater in the Land Rover (It wouldn’t fit after I did the Rover V8 Conversion), now is the time to get some heating again. I will be using the original heater, plus a second kitcar type heater inside, with new 3D Printed ducting and some rather powerful fans, […]