Gearbox Rebuild. Again…

Unfortunately no photos of the rebuild process, but I do have a few photos of the rebuilt gearbox, before I put it back in the truck. I added a sight tube to the side of the box, and a temperature sensor. Simply to make it easier to keep an eye on things!

Electrical Fuse Box Build

I’m building a fusebox for the Land Rover, to contain all the fuses, relays and other electronics for both systems (the main car electrics, and the house battery system). With a minor amount of work, the design could easily be adapted to a off-grid solar system or similar. I’ve designed most of the box in […]

New Solar MPPT Charge controller

I bought one of the cheap Tracer 4210AN MPPT Charge controllers for a project I have lined up. So far, it’s not bad for the price I’ve wired it temporarily on 4 of the 120W panels I have on my system, and I’ll keep an eye on it. So far, I’m getting 30% extra power […]

LED Floodlights for Off Grid use

I needed some decent floodlights for when I’m working on the car… But everything you find online is for mains powered stuff, usually with halogen bulbs, similar to the sort of thing used on building sites. Not good enough for me. I already had a few light-duty tripods, normally used for photography. I bought some […]

Preamplifier Repair and Modification, Part 1

So my old Audio preamplifier I built over 10 years ago needed a bit of work. I’ve been having issues with noise on some input sources, usually high frequency whining & humming. I’ve been trying to isolate earth loops for a while, but with mixed success. As a last ditch attempt, I decided to convert […]

Mutlipurpose LED Driver

So I’ve spent the last few days designing an LED driver, mostly for use within my solar system. The requirements are Input range of 9-32V (To run on either a 12V or 24V system) Use a switch mode converter to step down. Drive a RGB LED using a WS2811 LED Driver Or drive a single […]