Land Rover Rebuild – Day 4

Most of today was spent in the Garage, building up the gearbox and starting on the engine. Started with the gearbox, and specifically the reverse gear, with the issues I’ave been having with it jumping out of gear. With the gear fitted on it’s shaft, and the selector fitted, I could see that the gear […]

Land Rover Rebuild – Day 3

And so day 3 begins… Mostly carrying on from where I finished yesterday. The engine block has now been removed, was fairly easy to lift out once I’d remembered to remove the earth cable. I did end up removing the starter motor, disconnecting the gearbox, and the sliding the block forward so I could remove […]

Land Rover Rebuild – Day 2

So Day 2 has basically been stripping the front end completely. Wings off, radiator panel and radiator out, fluids drained and the engine stripped to pull out piece by piece (I don’t have an engine crane). While dismantling the engine, I found a few things of concern – mainly two damaged pistons where lumps of […]

Land Rover Rebuild – Day 1

So the time has come to do a large amount of work on the Land Rover. Mainly to get through an MOT, and so I can go on a road trip to the Netherlands. The list of things that need attention: Clean & Waxoyl Chassis, along with welding a few holes aroud the front crossmember […]