Land Rover Gearbox Rebuild (again)

I’ve now finished rebuilding the gearbox again – and probably not for the last time… This time (as there’s no rush to get back on the road with the pandemic) I’ve given the main castings a few coats of duck egg blue paint to match the engine and make it easier to keep clean. I […]

I found the problem!

I’ve been having gearbox issues again – it’s been very loud in 1st, 2nd & 3rd, and it sounds like a bearing. So I’ve pulled the gerabox out, and this is what I found! I’ve now ordered a full set of repalcement bearings, plus gaskets (I think this is related to the problems I was […]

Fusebox Finished!

I’ve finally finished building and wiring the fusebox for the landy – It took a fair few hours of wiring over the last couple of weeks! I’ll let the photos do the talking. I still have the PCBs to design, but there’s less of a rush for those – none are critical to the build, […]

PC Upgrade time!

Another job I’ve been meaning to finish off for a while – adding a few upgrades to my PC. I bought a better graphics card some time ago, a couple of solid state drives, and a couple of hard drives. Once again, I put my 3D printer to good use, making brackets to hold all […]

RGB LED Garden Lights

More than a year after I started the project, I’ve finally finished a set of waterproof RGB LED lights for my brothers garden. They can run on either 12V or 24V power, and draw about 30W with the LEDs set to white at full brightness, and about 10W running the rainbow cycle pattern. I’m rather […]

Some ‘new’ toys…

So I came across a job lot of older server hardwware – and I couldn’t resist buying it – I had the money, andthey were worth over twice as much if I stri and sell the parts… In more detail – there are 8 2U servers with 3rd gen i7 processors, 32GB of RAM, plus […]

A Small Solar System

After a load of hastle earlier in the year (where I had to remove the solar panels I had on my house) I’ve installed a small solar system to run a part of my house – mainly my PC, lighting and tools in my man cave! I used three 120W solar panels I had in […]

Raspberry Pi Projects

Some time ago I started building a add-on board for a Raspberry Pi Zero, at the time I never got the ethernet working, then other things came along, and I haven’t had chance to finish it until now… It didn’t take to long to work out why the ethernet wasn’t working, it turns out I […]

Making an LED light from an old LCD Monitor

For this small project, I used a Youtube video from DIY Perks as a guide – this one to be exact – https://www.youtube.com/watch?v=8JrqH2oOTK4 I used an old 19″ Monitor being thrown out at work, and used this LED strip from ebay: https://rover.ebay.com/rover/1/710-53481-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338568634&mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fitm%2F323888256457 Other than that, it was a very straight forward build. I did use […]

A minor engine rebuild

A week ago I finally decided to pull the heads off of the land rover engine, to see what if I could find out why I was having issues with loosing water & overheating. This is what I found: The head gaskets had broken up somewhat, the worst part being at the back of cylinder […]