So I was browsing eBay before Christmas for a battery charger (as I’ll need one for the tiny house as a backup). Usually decent chargers are £600 or more, but I came across a listing for one for £200, with a “faulty switch board”
A few questions later, to find out the history, and the seller offered it for £100 plus postage. It had been bought by a ferry company, and the switch board had been swapped with one from a failed unit (so everything else was still new!) And by switch board, they meant the board with the power switch on… It is a GMDSS unit (Global Maritime Distress and Safety System) – which is simply a standard charger with circuit breakers and a battery monitor module…


Once I’d checked the insides for any physical damage, I tried powering it up – Nothing… taking a few measurements with a multimeter revealed a 12V supply was working, and feeding a 5V regulator…
From there, I removed the upper board, injected 12V from a bench supply (it’s both safer and easier!), and started probing around. Both 5V regulators were producing 5V, and it was getting to the microprocessor and switch. As I was probing further, I found that pressing the probe on the side of the power switch would cause the board to wake up (It did show an error LED, but that’s because the rest of the charger wasn’t connected. And that was it! A broken switch pin!


And that was all it took to get a working charger! While I had it apart I removed one of the circuit breakers and the battery monitoring module (I can sell the module on most likely), and I reconfigured the extra contacts on the circuit breakers. This charger has an option to sense the battery voltage remotely (to compensate for any voltage drop along cables), so this is switched with the auxillary contacts. I did this to completely isolate the charger when it isn’t being used.
Finishing touches included 3D printing a cover for the hole where the second breaker was fitted.



Probably one of the easiest fixes I’ve done!
You got lucky with that one,
but that’s sinergex inverter you bought on eBay will be more challenging..
The guy that bought the other one I’ve given him your blog address hopefully you guys can share experiences with the inverter.
Hi James. My Ebay seller (Damian?) tells me you are repairing the same inverter he sold to me also. Cotek/Sinergex Power Inverter 3000W. Mines got IGBT failure plus more issues I think. message me if you’re happy to share info. I have no circuit diagram yet ! it seems to be a twin sync’d power inverter. tricky! cheers. Steve. youtube : harold spudovich.
@Damien, Yes, I got really lucky with that one!
@Steve, Yes, I’ve also got the same one (plus a few other models as well, a 24V 300W inverter and 1000W 12V one, all Cotek/Sinergex. I’ve only take a quick look inside so far, I’m in the process of moving, all my tools are boxed up at the moment. Once I get round to working on these, I’ll let you know!