Camping down the woods
So I spent a night down my parents woodland, mainly so I could get some piece and quiet, while I install some pipework for the LPG system.
So I spent a night down my parents woodland, mainly so I could get some piece and quiet, while I install some pipework for the LPG system.
I spent another day away, this time in the New Forest, invading a VW meet in the landy 🙂 Those who have seen the Hasta Alaska series on Youtube may recognise two of the Volkswagen campers!
Last night I started fitting the LPG kit, and as it requires a hot water feed, I finally have to do something about the heater in the Land Rover (as the LPG vaporiser uses the heater circuit). I’d ordered the parts to do it ages ago, but like many things, I never found the time […]
Unfortunately no photos of the rebuild process, but I do have a few photos of the rebuilt gearbox, before I put it back in the truck. I added a sight tube to the side of the box, and a temperature sensor. Simply to make it easier to keep an eye on things!
I’m building a fusebox for the Land Rover, to contain all the fuses, relays and other electronics for both systems (the main car electrics, and the house battery system). With a minor amount of work, the design could easily be adapted to a off-grid solar system or similar. I’ve designed most of the box in […]
The Land Rover gearbox… Again…
I’ve finally finished building this relay box – as part of the much larger project of rewiring the whole landy! This will be mounted on one of the radio boxes, so it’s near to the alternator, and the high current loads it will be supplying (headlights, spotlights, radiator fan and air compressor). I’ve done a […]
Tonight I’ve spent the evening updating the CAD model I started for the land rover, mainly so I can plan out the next storage units, making sure they are how I want them without wasting any wood. (The next things to build are the storage units on the passenger side)
I’ve needed to replace the number plate light on the back of the land rover for some time – one of the previous owners must have reversed the landy into a wall, and broken the light. (Not that there is a number plate at the top anymore, one has been bodged onto the bottom) But […]
Finally got round to fitting some more lights on the landy… And made the wiring loom to connect them up. Photos say it all really!