Land Rover Electrics

So over the last few weeks, I’ve replaced the next section of the original wiring loom on the Landy, plus all the ‘temporary’ additions I’ve made over the last few years. The loom runs from the new fusebox in the electrical cabinet behind the drivers seat, to the engine bay, dashboard and the front lights. […]

Land Rover Update

So I’ve been rather quiet on here again lately – but then, I’ve not finished much that’s worth writing a post for – although there will be a few interesting posts coming! But still, I’ve managed to get a few small projects done on the Landy. I got the trailer out of storage and gave […]

Land Rover Update

And it appears I’ve been a bit lax about keeping you all up to date… Anyway, here’s an update on my land rover… I’ve spent a great deal of time working on my land rover over the summer (what with various levels of lockdown, I’ve not been able to spend much time away!) I’ve made […]

Land Rover Interior Update

Over the past few weeks while on lockdown, I’ve made a bit more progress on the interior of the Land Rover – it’s tied in with the wiring, as I need to have the wiring in place to do the interior, but I need the interior fitted to work out where some of the wires […]

Land Rover Wiring & Fusebox

Now that I’ve finished the fusebox, the next job is to fit it! I’ve allocated an entire storage unit for all of the electrical systems, so it’s bolted in there, along with the charge controllers, inverter & audio amp (with more to come!) I’m also adding a few isolator switches, to make it easy to […]

Land Rover Gearbox Rebuild (again)

I’ve now finished rebuilding the gearbox again – and probably not for the last time… This time (as there’s no rush to get back on the road with the pandemic) I’ve given the main castings a few coats of duck egg blue paint to match the engine and make it easier to keep clean. I […]

I found the problem!

I’ve been having gearbox issues again – it’s been very loud in 1st, 2nd & 3rd, and it sounds like a bearing. So I’ve pulled the gerabox out, and this is what I found! I’ve now ordered a full set of repalcement bearings, plus gaskets (I think this is related to the problems I was […]

Fusebox Finished!

I’ve finally finished building and wiring the fusebox for the landy – It took a fair few hours of wiring over the last couple of weeks! I’ll let the photos do the talking. I still have the PCBs to design, but there’s less of a rush for those – none are critical to the build, […]

A minor engine rebuild

A week ago I finally decided to pull the heads off of the land rover engine, to see what if I could find out why I was having issues with loosing water & overheating. This is what I found: The head gaskets had broken up somewhat, the worst part being at the back of cylinder […]

New Landy Radiator

I’ve been having a lot of issues with the land rover recently – it’s been getting rather hot when driving up long hills, and even on the flat on hot days. So I finally replaced the original radiator with a custom made one (the original radiaotr was for the original 2.25l engine, with half the […]