Now it’s time to start building! I started by securing the plywood base of the under-floor storage area to the 4x4s and the underneath a coat of paint, before turning it over and bolting it to the trailer chassis.

The underneath of the floor (before turning it over!)
Bolting it all together

I’m using M8 stainless steel threaded rod to hold all these parts together, and secure the floor to the trailer – And if you’re wondering, no, it won’t be towed on the road! (I’m using an old trailer chassis that seen better days, purely to maneuvre the tiny house if I need to, and meet the planning requirements of a caravan or shepherds hut)

Trimming the studding
Adding the 4x2s that will support the main floor
4x2s all in position! Not yet fully bolted down, as I will be adding a layer of foil bubble insulation first.
Foil insulation fitted.

I’ve used foil bubble insulation here, both to add an extra bit of insulation, and create an air-tight barrier to prevent any heat being lost through any gaps. I’ll also be adding proper insulation too! Alternate 4x2s are bolted through all of the layers of wood, with the rest being screwed in place with 6″ wood screws.

Next, add the blocking, and start adding insulation…

Leave a Reply

Your email address will not be published. Required fields are marked *