New Landy Radiator

I’ve been having a lot of issues with the land rover recently – it’s been getting rather hot when driving up long hills, and even on the flat on hot days. So I finally replaced the original radiator with a custom made one (the original radiaotr was for the original 2.25l engine, with half the […]

Paraffin Lamp Restoration

I managed to find a bit of spare time to restore some old Hurricane style paraffin lamps. They’ve been sat in the loft for years, and were a bit rusty. Unfortunately there’s no ‘before’ photos, but there are more to do so I’ll get some next time. While I was there, I also repainted the […]

Land Rover Rebuild – Day 12

Unfortunately I’ve been too carried away to take photos, however the Landy is now running again! Did have a couple of minor issues, like a leaking water pump (just as well I bought a spare!) Now time to do some miles and run the engine in (I’m off to the Netherlands for a long weekend […]

Land Rover Rebuild – Day 10

Got a bit further with the engine rebuild today. Pistons and camshaft fitted, along with fitting the overdrive and new transfer box cover plate. Engine now on its mounts All the pistons fitted And from another angle Transfer box cover plate and overdrive Overdrive Fitted! With the lever fitted (Now there are four gearsticks!)

Land Rover Rebuild – Day 9

Managed to fit the crank, flywheel and engine block today. Had to fit the flywheel to the crank, get that lined up on the gearbox input shaft, then lowered the block (with the bearing shells fitted) onto the crank, then bolted up the main bearings. (Without a crane, I couldn’t build the engine, then fit […]

New Parts

Got some shiney new parts today! New Overdrive and Transfer box cover Roamerdrive! Certainly looks well built I don’t think those splines will wear out any time soon (unlike other brands of overdrive!) Heystee Disc Brake conversion kit

Land Rover Rebuild – Day 8

Welding Day! Also got the front springs fitted. I did however run into a couple of issues – the new front shocks are not long enough, and neither was the front propshaft. So I bought a propshaft spacer, and will fit the old shocks once the engine is fitted. I’ll fit the new shocks once […]

Land Rover Rebuild – Day 7

Got the new steering bars fitted last night, and moved the Landy outside the garage (easier to get to the tools!) Today has been fitting the new springs on the rear (Yes, it took all day in between the rain, and fighting seized bolts!) New Steering Bars. Old spring removed Old and New – It’s […]