So here comes the second part of my PCB upgrade – This all came about because a friend of mine gave me his old graphics card left over from when he upgraded (some time ago!)

It’s an AMD R9 Fury, and is a much, much more power hungry card (My current card is a 75W, this new one is 275W!

The new card.. AMD Radeon R9 Fury

And the icing on the cake? – A water cooling block was also included! You can see where this is going… I already had 280mm and 360mm radiators, and I ended up buying the remaining parts (CPU water block, Fans, pump reservoir and pipe) for a total of £120 (including a 120mm radiator which I will use for another project)

Bench Testing…

In case you were wondering (I know it won’t all fit in a 2U case), I’ll be leaving the lid off the case, and the radiators are mounted in rack vent panels, which will be bolted in the rear of the rack. The Pump and reservoir are both mounted directly to the fans (which also means any leaks won’t be going into the PC case!)

Close up of the GPU and CPU piping
Going into the rack…
And In!
The back of the rack – lots of area to vent the heat!

And if you were wondering how much difference it made? CPU runs under 60°C, and the GPU under 40°C, with both running under stress tests! Oh, and did I mention I can’t hear it? Before there was lots of fan noise, now it’s almost silent! Now I just need to sort a proper case, as this is a bit of a bodge… I’m thinking a 600mm deep, 5U rack case – in fact, I’m working on something right now!

Leave a Reply

Your email address will not be published. Required fields are marked *